To install this valve it requires me to cut the Fiberglass / tile to allow proper fittings, soldering etc, This I do using Special bits that dont crack the Gel coat on Fiberglass and Diamond bits to cut the tile.
TILE MUST BE IN GOOD SHAPE, NOT LOOSE AND COMING OFF THE WALL.
CuttingTile is an Additional $50.00 as the Diamond Bits are no good after job and must be disposed of.
This will be the last valve you ever have to buy!
The other alternative is to tear down the tile wall, or remove the tub and install a new one, if its fiberglass you will need to remove the walls above the tub, also the floor in front of the tub, then replace with a 3 piece tub and shower unit. The 3 piece unit has an ugly caulking line where each piece goes together. To replace the tub unit it will cost a minimum of $2500.00 to $5000.00.
The simple valve replacement as pictured is under $700.00 a fraction of the cost!
Pictured below are 2 Symmons Shower Valve and Retro Fit Plate, this plate all
 PLEASE SCROLL TO BOTTOM FOR MORE PICTURES PRICING AND DESCRIPTIONS

The Symmons Valve can be rebuilt for years to come, in the event it starts to leak I can replace all parts without disturbing the wall whatsoever, I have several valves that I have rebuilt that have been in homes for over 15 years plus.
OVER 100 INSTALLED IN HOMES IN SOUTHERN NH WITH NO CUSTOMER COMPLAINTS!
The Symmons Valve comes with a manufactures warranty of 1 year parts or valve replacement.

Have Your Old Fixtures Like This Replaced To A New Symmons Valve.
These Old 1 Handle Valves Pictured below are Illegal Per NH Plumbing Code
As of 2014 Code Requires all Valves and Faucets to be LEAD FREE

NH Plumbing Code Requires all Tub/Shower Valves be Anti Scald, Pressure Balance Valves with the proper ASSE compliance numbers Valves must turn on with cold water first.

Example: Ever flush a toilet while someone is in the shower? Does the shower water get hotter? That is not an accepted ASSE 1016 compliance valve. 3 Handle valves are no longer accepted unless there is an accepted ASSE compliance pressure balanced anti scald valve installed on the lines preceding the valve.
Full 5 Year Parts and Labor Warranty.
Well Water must be good or Warranty is Voided.
Welcome To Tub Shower Valve Repair
TubShowerRepair.com
By Tony Coppola Plumbing
Call 603-401-5678
Text Me By Clicking Here 6034015678@vtext.com
Email me at TonyThePlumber@me.com
IF YOUR CURRENT SHOWER/TUB VALVE IS 8 YEARS OR OLDER REPLACMENT PARTS ARE UNAVAILABLE.
UNLESS IT IS A SYMMONS VALVE.
REPLACE YOUR DELTA / MOEN/ PRICE PFISTER ETC VALVES WITH A 
SYMMONS PRO VALVE

All Symmons Pro Valves are 100% Brass, No Plastic.
(Unlike The Big Box Stores retail valves)

5 YEAR 100% PARTS AND LABOR WARRANTY
WELL WATER MUST BE GOOD OR WARRANTY IS VOID.

 IT'S THE LAST VALVE YOU WILL EVER PURCHASE!
OVER 200 SYMMONS VALVES INSTALLED, WITH NO CUSTOMER COMPLAINTS!
Please Visit TonyThePlumber.com From Your 
Desktop / Laptop For a Better View.
TOTAL / PARTS VALVE LABOR FOR THE SYMMONS PRO ORIGINS VALVE IS $620.00 
THIS IS THE PRO SERIES NOT THE CHEAPER RETAIL VERSION SOLD IN BIG BOX STORES 
PLEASE READ BELOW FOR DESCRIPTION. 
TILE WALLS ARE ADDITIONAL $50.00 DUE TO THE DIAMOND BITS THAT ARE PURCHASED. 
THEY ARE ONLY GOOD FOR 1 TIME USE.

TOTAL  / PARTS VALVE LABOR FOR THE SYMMONS PRO ALLURA VALVE IS $650.00 
THIS IS THE PRO SERIES NOT THE CHEAPER RETAIL VERSION SOLD IN BIG BOX STORES 
PLEASE READ BELOW FOR DESCRIPTION.

SYMMONS VALVES INSTALLED WITH A RETRO FIT PLATE
NO NEED TO REMOVE WALLS OR TILE!

SYMMONS PRO  VALVE / SPRO WITH REMODELERS PLATE ALL LABOR, FITTINGS, VALVE PLATE IS $620.00 INSTALLED FULL 5 YEAR 100% PARTS AND LABOR WARRANTY, 
THIS VALVE IS ALL BRASS NO PLASTIC

OVER 200 INSTALLED WITH NO CUSTOMER COMPLAINTS
SYMMONS PRO VALVE SPRO $620.00 Installed.
SYMMONS PRO  VALVE / SPRO-A
THIS IS THE SAME VALVE WITH DIFFERENT TRIM PLATE
INSTALLED IS $650.00
FULL 5 YEAR 100% PARTS AND 
LABOR WARRANTY, 
THIS VALVE IS ALL BRASS NO PLASTIC
SYMMONS PRO VALVE SPRO-A $650.00 Installed
Many Ask Why does it cost so much? 
Please scroll below and view the tools necessary as well as the steps that need to be taken to do the job, Thank you.
If your wall is Tile an additional $50.00 is required for Diamond bits that are used. They are burnt out and disposed of after job. Tile must be in good shape and not loose to cut.
Below is the procedure to install the valves.
Minimum Tools necessary, Tubing Cutter, Electric and Manual, Commercial Saw, Commercial Roto Zip with proper bits for Fiberglass and Tile. You must cut fiberglas with proper bit or the Gel Coat will melt or crack. Torch, Solder, Copper fittings and adapters, among other items in my van, wood for blocking hangers, etc.
Original Non State Approved Non Safety Valve
Remodelers Plate Template
Cut to remove old valve. 
Unsolder Old Valve Fittings For Removal.
Extreme care must be taken to not melt Tub Walls.
Old Valve Removed Pipes Cut and prepared for new Valve and fittings.
New Valve Fitted, Piped and being Soldered using Lead Free Silver Based Solder.
Extreme care must be taken to not melt Tub Walls.
New Pro Valve Roughed In Soldered and Tested.
Remodelers Plate Installed
Complete Valve with Trim
Completed Symmons 
Retro Fit Project
Full 5 Year Parts and Labor Warranty
Symmons Pro Valve / SPRO
Symmons Pro Valve / SPRO-A
SYMMONS PRO  VALVE / SPRO WITH REMODELERS PLATE ALL LABOR, FITTINGS, VALVE PLATE IS $620.00 INSTALLED FULL 5 YEAR 100% PARTS AND LABOR WARRANTY, 
THIS VALVE IS ALL BRASS NO PLASTIC

OVER 200 INSTALLED WITH NO CUSTOMER COMPLAINTS
SYMMONS PRO  VALVE / SPRO-A WITH REMODELERS PLATE SAME PRO VALVE DIFFERENT TRIM.ALL LABOR, FITTINGS, VALVE PLATE IS $650.00 INSTALLED FULL 5 YEAR 100% PARTS AND LABOR WARRANTY, 
THIS VALVE IS ALL BRASS NO PLASTIC

OVER 200 INSTALLED WITH NO CUSTOMER COMPLAINTS
If you would like one of these Valves Installed Call Me at 603-401-5678 or Click  Link Below To Send Me A Text
Text Me By Clicking Here 6034015678@vtext.com